Solved

discussions that do not *require* further discussion, but are not to be closed

V
Bela C++ Code For 8x ADC to Serial
- SoftwareC/C++Solved
- hi - I'm running some C++ code I wrote for the Bela to send 8 of its ADC input readings over serial/usb to my Mac (Pure Data). I don't need super high sample rate so the code ...
37 replies
P
Compiling Plugins for Csound on Bela Board
- GeneralSolved
- Hello everybody. I wrote some Csound Plugins to use on the Bela Board. The Csound API is using the float type 'MYFLT', which checks if the system is running floats or doubles....
10 replies
D
digitalIn - button/LED example not working.
- InteractivitySolved
- Hello, setting up a pd patch for the bela, everything working fine. Connecting a button to control the patch, and nothing is coming through. Tested out the example here: https...
6 replies
G
How to flash firmware to Trill Craft
- TrillSolved
- Hi I would like to order Trill Craft PCB's (Open Source GitHub design) and solder the required components to it myself. However, after adding components to the board I assume ...
6 replies
R
Bela Log
- GeneralSolved
- Hi! any chance to catch the console log? I want to send it further, possibly with pdsend...
34 replies
P
How to use OLED display with heavy
- SoftwareC/C++Pure DataSolved
- Is there a viable way to use an OLED display with a heavy compiled project? I had a look at this Posts: https://forum.bela.io/d/4458-osc-with-heavy but so far only the OSC-rec...
5 replies
S
synchronizing multiple bela units
- SoftwareC/C++Solved
- I have programmed a bela unit to function as a 10 track record / playback box (8 analog i/o + stereo audio) that performs three operations. The three operations are (1) go to ...
62 replies
A
using digital pins with hvcc
- SoftwarePure DataSolved
- ...ust started recently working with a bela mini and I managed to get my patches work with hvcc, but I struggle to get the pins working. I tried to set them up [ r bela_digitalIn...
2 replies
Can I use an Analog Pin for a button?
- HardwareSolved
- Dear forum: I've run out of Digital pins in my project. Can I use Analog pins for a digital inputs? For something like a push button or a toggle switch. I assume yes, but plea...
2 replies
J
SuperCollider & Multichannel Expander
- SoftwareSuperColliderSolved
- Hey! I have a Bela Mini with the multichannel expander and I am trying to run a project with supercollider but there is no sound. Even the supercollider hello example does not...
10 replies
F
shutdown with display notification
- SoftwareC/C++Solved
- Hei there, I was wondering, is there a way to send out a last osc message to an oled display after turning off the Bela? I have a C++ project which is using the OSCSender clas...
4 replies
W
Analog Joystick for Bela Mini
- HardwareSolved
- Hi, I’m developing a project which requires the configuration of 2 analog joysticks to control parameters in Pure Data. Has anyone already used some? Would these work with bel...
2 replies
audio channel cutting out after close to 7min
- SoftwareC/C++Solved
- Hi all, i was rehearsing with the Bela and i was losing an audio on the right channel and some times losing it in both. So today i tested it with a simple sine-tone program on...
6 replies
R
Suggestions on adding a Power On/OFf switch?
- HardwareSolved
- So I'm going to try running the Bela from the battery 5V DC input and running my project from boot. I was wondering if anybody had a neat way to include an on/off switch? I ha...
25 replies
N
Wiring Language Support functions outside of render.cpp
- SoftwareC/C++Solved
- Hi there, Basic question coming in - how do I use the methods from the "Wiring language support" module (map, constrain, min, max) when I am not in the render.cpp file? I coul...
1 reply
H
Is there a way to get the serial data of an enttec DMX usb pro into a Pd patch?
- InteractivitySolved
- I need to control a Pd patch on a bela mini for an installation using DMX. I was wondering if I could use an enttec DMX USB Pro (which I have available) for that task and some...
10 replies
J
Automatic project launch on startup
- SoftwareC/C++Solved
- Hello everybody, I've built my self a nice amp/speaker emulation using the Bela and the RTNeural framework. It is now embeded into my pedalboard and has survived two intense d...
3 replies
A
Reading analog inputs in PureData
- SoftwareC/C++Solved
- Heyy, Is it possible to read the values from the 8 adc~ ports at the same time? Currently i have 8 potentiometers and the wiring is correct but when i try to read the values f...
28 replies
K
Control Neopixel with Pure Data
- GeneralSolved
- Hi, I am working on a project where I want to use Bela with Pure Data and control Neopixel. Is there an easy way to do this/a tutorial available? I want to use this Neopixel R...
30 replies
A
Connect Bela with MPR121 I2C using libpd library
- SoftwareC/C++Solved
- I've seen some discussions here from some years ago about similar projects. I based myself on them but it doesnt seam to work. The render.cpp and the _main.pd files are posted...
7 replies

Solved

discussions that do not *require* further discussion, but are not to be closed

Bela C++ Code For 8x ADC to Serial

Compiling Plugins for Csound on Bela Board

digitalIn - button/LED example not working.

How to flash firmware to Trill Craft

Bela Log

How to use OLED display with heavy

synchronizing multiple bela units

using digital pins with hvcc

Can I use an Analog Pin for a button?

SuperCollider & Multichannel Expander

shutdown with display notification

Analog Joystick for Bela Mini

audio channel cutting out after close to 7min

Suggestions on adding a Power On/OFf switch?

Wiring Language Support functions outside of render.cpp

Is there a way to get the serial data of an enttec DMX usb pro into a Pd patch?

Automatic project launch on startup

Reading analog inputs in PureData

Control Neopixel with Pure Data

Connect Bela with MPR121 I2C using libpd library