Getting Started

Learn how to get up and running with Bela.

Getting started
- Getting StartedFAQ
- If you are just starting out with Bela, Gliss or Trill, check out https://learn.bela.io/
0 replies
K
Old (v0.2.0a) bela image with new (sequoia) MacBook
- Getting Started
- Hi! Trying to run an old Bela image (v0.2.0a) with my new MacBook (sequoia). BELABOOT is recognized in the finder but can't load the IDE via 192.168.7.2 or Bela.local. Also tr...
2 replies
Z
Analog pins not wokring
- Getting Started
- Hello! I’m new to Bela and recently started following a Bela C++ course on YouTube. I’ve been progressing well, but I ran into an issue while working on the sixth video (Analo...
7 replies
R
Can't connect to IDE or Bela via CLI or Browser
- Getting Started
- Hello all, I'm attempting to get my Bela working, but I seem to be having no joy. I have flashed an SD card with the latest available image v0.3.8h. The board seems to boot up...
3 replies
Bela Mini Multichannel Expander
- Getting Started
- As you may have found out by now, we have a new multichannel board, this time in the BelaMini form factor: the Bela Mini Multichannel Expander. The expander has 6 audio in and...
11 replies
G
Bela for midi sync / clock sync timings
- Getting Started
- I'm wondering if Bela is right for what I'm trying to achieve, I need to send clock (timing) information out via two ethernet cables and and also out via midi out cable, I'm c...
3 replies
S
Updating Bela
- Getting StartedSolved
- Hi just trying to update my Bela and running into an error. Image: v0.3.7c, 27 February 2020 Core code: Last attempted update on '2 Oct 2024 15:29:07 ' from file '/root/Bela/u...
4 replies
V
Pattern of 6 different pitches
- Getting Started
- Hi, I'm new to PD and Bela. Following this tutorial, I did not manage to create a repeating pattern of 6 different pitches until I modified the patch as it's shown. Is this a ...
3 replies
J
Pd tutorial missing images
- Getting Started
- Hello! I'm following the Pd tutorials and noticed two missing images in Task 4/5 solutions (when you click the window). I tried it in 2 browsers. The tutorials are v useful so...
2 replies
J
Cannot connect my bela mini
- Getting Started
- Hello I'm on macOS Catalina 10.15.7 I've just received my first bela mini starter kit. when I first connected, I imported a pure data project (that I dit at school - I'm a beg...
19 replies
J
Cannot connect to Bela after image update
- Getting Started
- I seem to have this same problem with both of my Belas now. I have mini and the normal. Hmm, I have no recollection when I tried last time to log in to bela with IDE. I was ye...
15 replies
Can't connect to Bela (Salt) to launch IDE
- Getting Started
- As noted in the subject, things seem to be in place, but the attempt to connect to the IP address to launch the IDE in the browser times out. Any help would be very much appre...
12 replies
D
Updating Bela ide failed
- Getting Started
- I have started working on Andrew's videos and number 1 says to update the ide (17 Nov 2020). I followed the instructions, downloaded the core software and did the 'Update Bela...
33 replies
T
PEPPER: Accurately sending pitch CV
- Getting Started
- Hi all, how do I accurately send a pitch CV from my Bela Pepper to my modular? I'd like to convert from MIDI notes to pitch CV and send it to one of Pepper's analogue outs to ...
1 reply
No audio first time booting
- Getting StartedSolved
- I bought a Bela starter kit. I'm have audio out cable connected to amp. (If the amp connects to my phone as an audio source, I hear audio fine.). When I boot the Bela, I see a...
2 replies
Setting up DHCP and Internet Sharing on Linux
- Getting StartedAdd to wiki
- Hello there, I want to share my solution to connect Bela to a Linux computer. My host computer detected the Bela network adapter when plugged in via USB. However, it did not a...
5 replies
E
unable to connect it to Bela.local.
- Getting StartedSolved
- Hello there, A month ago, I bought a Bela starter kit but I'm unable to connect it to Bela.local. Every attempt results in the error message ‘DNS_PROBE_FINISHED_NXDOMAIN.' Des...
14 replies
B
Problem with sending multichannel audio signal through UDP
- Getting Started
- Hello, i am new to bela. I have a problem sending data through UDP. I read 8 channel microphone datas and send it through UDP port. I tried many approaches to send the 8 chann...
3 replies
L
analog problem CTAG FACE + Bela
- Getting StartedSolved
- Hi! I'm just getting started and having some trouble with the analog inputs. I've scoured the forum and documentation, but I think it's time to ask for help. All the analog in...
22 replies
V
Connecting flex sensors to Bela
- Getting Started
- As a beginner I'd like to ask if I want to connect multiple flex sensors to Bela, whether I need 9V battery or microcontroller voltage will suffice for optimal readings.
1 reply

Getting Started

Learn how to get up and running with Bela.

Getting started

Old (v0.2.0a) bela image with new (sequoia) MacBook

Analog pins not wokring

Can't connect to IDE or Bela via CLI or Browser

Bela Mini Multichannel Expander

Bela for midi sync / clock sync timings

Updating Bela

Pattern of 6 different pitches

Pd tutorial missing images

Cannot connect my bela mini

Cannot connect to Bela after image update

Can't connect to Bela (Salt) to launch IDE

Updating Bela ide failed

PEPPER: Accurately sending pitch CV

No audio first time booting

Setting up DHCP and Internet Sharing on Linux

unable to connect it to Bela.local.

Problem with sending multichannel audio signal through UDP

analog problem CTAG FACE + Bela

Connecting flex sensors to Bela