Trill

Trill capacitive sensors

G
constant value's
- Trill
- problem solved
3 replies
G
How to flash firmware to Trill Craft
- TrillSolved
- Hi I would like to order Trill Craft PCB's (Open Source GitHub design) and solder the required components to it myself. However, after adding components to the board I assume ...
6 replies
G
How to interpret touchLocation() and touchSize() in CustomSlider?
- TrillAdd to wiki
- Hi, In my Arduino/C++ program, I've created a CustomSlider to generate the centroids from a TRILL Flex strip. It's based on the demo here (https://github.com/BelaPlatform/Tril...
6 replies
K
Setting analog in pins for Trill Square with Pi Pico (using Arduino IDE)
- Trill
- Hi folks, Has anyone here tried the Bela Square hooked up to the Pi Pico, programmed using the Arduino IDE? From looking at the diagram on https://learn.bela.io/using-trill/tr...
5 replies
Trill and Pico
- Trill
- I've been designing a Trill-based peripheral for a project and thought I'd try and use some of the Picos I have lying around my desk. If I could crack this I could finally use...
2 replies
T
multiple trill
- Trill
- Hello, is it possible to connect various trills like a square and a bar on the same sda i2c pins without using a trill hub?I only need 2 so it seems overkill to buy the hub. T...
2 replies
M
TrillCentroids blocking TrillRaw
- TrillSolved
- Hey hi Giulio et allii, I have been migrating my tested SuperCollider code to a new Bela mini and for some reason the TrillCentroids UGen seems to block the TrillRaw UGen on t...
9 replies
C
Trill Hex, Bar, Ring Issue. Square working perfectly
- Trill
- Hi All, I have a full set of trill sensors, and I was testing them out with a Bela mini and pure data. I followed the tutorial on the Bela site(https://learn.bela.io/using-tri...
1 reply
Y
Trill COM port ArrayIndexOutOfBoundsException
- TrillSolved
- Hello! I have a Trill Hex hooked up to a Teensy 4, and am using the teensyduino library for the arduino ide. I have it all set up, and the serial monitor in the arduino ide is...
2 replies
S
Trill sensors developments
- Trill
- Is there a new generation of Trill sensors in the pipeline? If so, what new features would they provide, and when should we expect them to be available? This might help me dec...
6 replies
H
Trill Craft: Spikes in raw data using a Raspberry Pi
- Trill
- Hi, I have three Trill Craft boards connected to a Raspberry Pi 3. When I read the raw data continously I get some spikes from time to time - see attachment. One value is for ...
14 replies
I want to play a wav file to the end without interruption.
- Trill
- Hi, I am from Japan and interested in bela and trill craft. I would like to sound a wav file in trill craft using the pure data example. I just have one change I would like to...
13 replies
S
Bela Trill Craft - Failed to prepare Trill data collection
- Trill
- Hello, I am migrating a project over from the Bela Mini to the Bela and I seem to be having issues with my Bela and am unsure where the issue is coming from. I'm getting conti...
3 replies
prescaler? threshold?
- Trill
- M5Stack basic, bela trill craft, e-textile, ArduinolDE I wanted to use these to create a conductive cloth touch sensor that would respond to touch at three different locations...
1 reply
I
craft
- Trill
- Hi! I have a little question! How to use trill craft with rnbo environment? Is it the same as with other trills? I just have to assign number of parameter to my craft and then...
5 replies
C
Trill Craft Multiple Pads Being Triggered
- Trill
- Hi all, I have a Bela board attached to a Trill Craft, which has six lines of conductive thread sewn into a shirt, see below. Each line is connected to a pad, and I'm trying t...
1 reply
M
flex library question
- Trill
- Hey hi, I am designing a custom flexible sensor for a project and I followed the excellent tutorial from the Bela blog on how to to this in Kicad (the very first time I use it...
9 replies
M
Trill Flex + SuperCollider
- TrillSolved
- Hello there, For a project I am working with the Bela mini capelet in conjunction with Trill sensors. I am using SuperCollider and found the TrillCentroids and TrillRaw UGens ...
10 replies
E
JST female to board?
- Trill
- Hi, the trill bar comes with a Qwiic JST connector and a wire assembly with a female connector. I wonder if somebody has an idea how to skip the wires and go directly to a PCB...
2 replies
M
Integrating Trill flex with STM32
- Trill
- Hi, I was following the step in trill sensors to implement the code in the STM32. I am using nucleo-h723zg, but all the board will work the same. I am using trill flex sensor ...
6 replies

Trill

Trill capacitive sensors

Next Page »