E
Echo

  • 10 Feb
  • Joined Feb 1, 2024
  • 1 discussion
  • 9 posts
  • giuliomoro Dear qiuliomoro, thank you so much for your help, I follow the instructions you've recommended, and it worked! Best wishes

  • giuliomoro
    I understand. I'll give it a try tomorrow; it's quite late now, and my brain is starting to slow down 🙂

  • I haven't experienced any connection issues with the Bela Mini, which I purchased in 2022. However, I haven't yet attempted to insert an SD card into the larger Bela model. I will go to purchase an SD card and follow your suggestion to flash the new image onto it. I'm hopeful this will resolve the problem. Thank you so much for your help, I will update you on the outcome after I try it tomorrow. Cheers

  • I purchase it directly from the Bela shop 🙁

  • giuliomoro ioreg -p IOUSB -w0 -l | grep -i bela

    MLO am335x-bone-bela-black-wireless.dtb drivers uEnv.txt
    System Volume Information am335x-bone-bela.dtb u-boot.img
    zsh: no matches found: /Volumes/BELA*/bela.version
    (base) echoho@Echos-MBP ~ % ioreg -p IOUSB -w0 -l | grep -i bela
    +-o Bela@14310000 <class AppleUSBDevice, id 0x10009c3c8, registered, matched, active, busy 0 (2 ms), retain 25>
    "USB Product Name" = "Bela"
    "kUSBSerialNumberString" = "bela"
    "kUSBProductString" = "Bela"
    "USB Serial Number" = "bela"

  • Thank you for your time! The result is too long to be pasted here...

    • $ ifconfig
      lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
      	options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
      	inet 127.0.0.1 netmask 0xff000000 
      	inet6 ::1 prefixlen 128 
      	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
      	nd6 options=201<PERFORMNUD,DAD>
      gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
      stf0: flags=0<> mtu 1280
      en5: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
      	ether ac:de:48:00:11:22 
      	inet6 fe80::aede:48ff:fe00:1122%en5 prefixlen 64 scopeid 0x4 
      	nd6 options=201<PERFORMNUD,DAD>
      	media: autoselect (100baseTX <full-duplex>)
      	status: active
      ap1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
      	options=400<CHANNEL_IO>
      	ether 36:7d:da:1b:08:0f 
      	media: autoselect
      en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
      	options=400<CHANNEL_IO>
      	ether 14:7d:da:1b:08:0f 
      	inet6 fe80::54:769f:dbfe:fb6c%en0 prefixlen 64 secured scopeid 0x6 
      	inet 192.168.178.157 netmask 0xffffff00 broadcast 192.168.178.255
      	inet6 2001:9e8:16d9:5800:1836:7c67:156f:f688 prefixlen 64 autoconf secured 
      	inet6 2001:9e8:16d9:5800:cdcc:a8ce:a232:d68b prefixlen 64 autoconf temporary 
      	nd6 options=201<PERFORMNUD,DAD>
      	media: autoselect
      	status: active
      awdl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
      	options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>
      	ether fa:99:41:d6:72:74 
      	inet6 fe80::f899:41ff:fed6:7274%awdl0 prefixlen 64 scopeid 0x7 
      	nd6 options=201<PERFORMNUD,DAD>
      	media: autoselect
      	status: active
      bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
      	options=63<RXCSUM,TXCSUM,TSO4,TSO6>
      	ether 82:8f:80:24:58:01 
      	Configuration:
      		id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
      		maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
      		root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
      		ipfilter disabled flags 0x0
      	member: en1 flags=3<LEARNING,DISCOVER>
      	        ifmaxaddr 0 port 11 priority 0 path cost 0
      	member: en2 flags=3<LEARNING,DISCOVER>
      	        ifmaxaddr 0 port 12 priority 0 path cost 0
      	member: en3 flags=3<LEARNING,DISCOVER>
      	        ifmaxaddr 0 port 13 priority 0 path cost 0
      	member: en4 flags=3<LEARNING,DISCOVER>
      	        ifmaxaddr 0 port 10 priority 0 path cost 0
      	nd6 options=201<PERFORMNUD,DAD>
      	media: <unknown type>
      	status: inactive
      llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
      	options=400<CHANNEL_IO>
      	ether fa:99:41:d6:72:74 
      	inet6 fe80::f899:41ff:fed6:7274%llw0 prefixlen 64 scopeid 0x9 
      	nd6 options=201<PERFORMNUD,DAD>
      	media: autoselect
      	status: inactive
      en4: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
      	options=460<TSO4,TSO6,CHANNEL_IO>
      	ether 82:8f:80:24:58:04 
      	media: autoselect <full-duplex>
      	status: inactive
      en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
      	options=460<TSO4,TSO6,CHANNEL_IO>
      	ether 82:8f:80:24:58:01 
      	media: autoselect <full-duplex>
      	status: inactive
      en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
      	options=460<TSO4,TSO6,CHANNEL_IO>
      	ether 82:8f:80:24:58:00 
      	media: autoselect <full-duplex>
      	status: inactive
      en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
      	options=460<TSO4,TSO6,CHANNEL_IO>
      	ether 82:8f:80:24:58:05 
      	media: autoselect <full-duplex>
      	status: inactive
      utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
      	inet6 fe80::a895:6141:3fcd:4bbe%utun0 prefixlen 64 scopeid 0xe 
      	nd6 options=201<PERFORMNUD,DAD>
      utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
      	inet6 fe80::cb8d:8056:2353:519f%utun1 prefixlen 64 scopeid 0xf 
      	nd6 options=201<PERFORMNUD,DAD>
      utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1000
      	inet6 fe80::ce81:b1c:bd2c:69e%utun2 prefixlen 64 scopeid 0x10 
      	nd6 options=201<PERFORMNUD,DAD>
      utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
      	inet6 fe80::9ac4:567d:db54:641a%utun3 prefixlen 64 scopeid 0x11 
      	nd6 options=201<PERFORMNUD,DAD>
      utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
      	inet6 fe80::b968:95ea:75c4:6dc%utun4 prefixlen 64 scopeid 0x12 
      	nd6 options=201<PERFORMNUD,DAD>
      $ cat /Volumes/BELABOOT/bela.version
      cat: /Volumes/BELABOOT/bela.version: No such file or directory
      $ ls /dev/tty*bela*
      /dev/tty.usbmodem__bela__4
      $ ioreg -p IOUSB -w0 -l
      +-o Root  <class IORegistryEntry, id 0x100000100, retain 26>
        | {
        |   "IOKitBuildVersion" = "Darwin Kernel Version 22.2.0: Fri Nov 11 02:08:47 PST 2022; root:xnu-8792.61.2~4/RELEASE_X86_64"
        |   "OS Build Version" = "22C65"
        |   "OSKernelCPUSubtype" = 3
        |   "OSKernelCPUType" = 16777223
        |   "OSPrelinkKextCount" = 18
        |   "IORegistryPlanes" = {"IOPower"="IOPower","IOService"="IOService","IO80211Plane"="IO80211Plane","IOUSB"="IOUSB","CoreCapture"="CoreCapture","IOACPIPlane"="IOACPIPlane","IODeviceTree"="IODeviceTree"}
        |   "IOConsoleLocked" = No
        |   "IOConsoleUsers" = 
    • giuliomoro ifconfig
      cat /Volumes/BELABOOT/bela.version
      ls /dev/ttybela
      ioreg -p IOUSB -w0 -l

    • Hello there,
      A month ago, I bought a Bela starter kit but I'm unable to connect it to Bela.local. Every attempt results in the error message ‘DNS_PROBE_FINISHED_NXDOMAIN.' Despite trying all solutions available online, I've had no success. I'm using a MacBook Pro with MacOS Ventura. Any assistance in resolving this issue would be greatly appreciated.