Eurorack

Bela in the world of analog synths

F
Pepper feature requests
- HardwareEurorack
- When using Pepper regularly, often ideas for new features pop up. Maybe these can be considered while developing the new version (Rev C). These are just my ideas as a user, I ...
15 replies
E
No analog I/O or audio on new Pepper build
- HardwareEurorack
- Hi all, I've just built a pepper from the kit bought directly from Bela.io. I can use the IDE to upload to the "Getting Started" pure data example to the Bela board fine, and ...
10 replies
J
Salt faceplate
- HardwareEurorack
- Hi, I just added a programmed Salt module to my eurorack and wonder if the faceplate measures are available somewhere, much like the Pepper https://github.com/BelaPlatform/bel...
2 replies
Bela Pepper Eurorack Cape assembled for sale
- HardwareEurorack
- Hi everyone! I have a Bela Pepper Cape for sale, assembled and tested. €295 + shipping from Sweden
1 reply
G
Pepper shuts off when USB unplugged, even in presence of Eurorack power
- HardwareEurorack
- I used to be able to unplug the Mini USB cable from my computer after I booted up a patch in the Bela IDE. Now, even if Pepper is powered by my rack, disconnecting the USB con...
5 replies
Different behaviour when patch launched on GUI
- HardwareEurorack
- I am using this granular patch a lot on my Pepper: https://github.com/yannseznec/ys.granularPepper For playing back samples it works great (press button 1 to load a random sam...
4 replies
Pepper: *loop_* versus build and run
- HardwareEurorackSolved
- while tinkering to get my OLED working w/Pepper, i ran into this issue: i have my O2O service file running in the background. i have a patch here that runs fine when i drag an...
9 replies
Pepper trigger input voltage requirement
- HardwareEurorack
- Hey! If I have a Pepper input set to digital mode, what is the voltage that generates the trigger? I'm just building a simple clock circuit and 3v doesn't seem to do it (no su...
1 reply
PEPPER - audio noise in DAC
- HardwareEurorack
- Hi all, I build a pepper recently and I'm having a big noise floor in the module audio output. If I plug the us, run and then stop the project the noise reduces a lot. Most of...
35 replies
best practice Pepper input/output
- HardwareEurorack
- Hello! once again I'd like to start with a caveat: I'm very new to modular stuff, and the Pepper is my first and only module right now. I'm curious about what the best practic...
3 replies
Pepper knob/input issue
- HardwareEurorackSolved
- I'm just starting to test my Pepper (and I'm new to modular synthesis, please forgive my ignorance). I suspect I must have messed up something in the wiring for my knobs. Here...
9 replies
T
Bela Pepper Input voltage ranges
- HardwareEurorack
- Hi! I'm finally sitting to test my Bela Pepper. I'm having a ball with SuperCollider and my modular but I'm surprised by the behaviour of my analog inputs. With no inputs conn...
6 replies
C
My general purpose on demand all-in-one Bela I/O Box
- HardwareEurorack
- Hi all, just to share my general purpose flexible Bela_I/O_Box in picture. I have on demand as required 16 thonkiconn for Digital outputs from Bela to external devices 8 thonk...
5 replies
M
How can I convince myself my Bela Pepper build is safe to put into my main case?
- HardwareEurorack
- My Peppper is barely getting touched because I've convinced myself I can't put it in my main case! Could there be a risk from any soldered shorts bleeding back into the bus bo...
3 replies
O
Pepper V2 potentiometers, Log or Linear?
- HardwareEurorack
- Hello, I'm building a Pepper V2 for a friend. The resources on github are great but regarding the 8x 50k potentiometers, it's not 100% clear to me. The BOM has 3 links, the 1s...
2 replies
A
Pepper Potentiometers
- HardwareEurorack
- Hey belas! I'm thinking on going Pepper! And I have a question regarding the pots. On my current Bela setup I have 5v conected to 8 pots and I use the reading of those as cont...
1 reply
T
Pepper jumper configuration
- HardwareEurorack
- Can you confirm these are the appropriate settings please? I want to run with audio out amplified by 5 volts and have analog inputs.
1 reply
T
Pepper Power Headers
- HardwareEurorackSolved
- Hi all, I'm busily soldering my Pepper board together. I've reached step 16 but I'm struggling to understand the notes about the 10 or 16 pin power connection. I'm using the f...
1 reply
Pepper SETUP?
- HardwareEurorack
- Hi there, I just got a new BELA CAPLET (fried the previous one) and the PEPPER version v2, now I start the usual patch I have but the output working is the 1 and 2 (the J9 jum...
5 replies
Fibonacci Music Box adaptation for Pepper
- HardwareEurorack
- Just finished a patch and wanted to share. based on Marc Evanstein's wonderful work: and https://marcthespark.github.io/FibonacciMusicBox/ do check those out! i wanted a worka...
0 replies

Eurorack

Bela in the world of analog synths

Pepper feature requests

No analog I/O or audio on new Pepper build

Salt faceplate

Bela Pepper Eurorack Cape assembled for sale

Pepper shuts off when USB unplugged, even in presence of Eurorack power

Different behaviour when patch launched on GUI

Pepper: *loop_* versus build and run

Pepper trigger input voltage requirement

PEPPER - audio noise in DAC

best practice Pepper input/output

Pepper knob/input issue

Bela Pepper Input voltage ranges

My general purpose on demand all-in-one Bela I/O Box

How can I convince myself my Bela Pepper build is safe to put into my main case?

Pepper V2 potentiometers, Log or Linear?

Pepper Potentiometers

Pepper jumper configuration

Pepper Power Headers

Pepper SETUP?

Fibonacci Music Box adaptation for Pepper

Pepper: loop_ versus build and run