is anyone successfully using i2c OLED / LCD?

Iinsignificatother · Mar 2, 2020

giuliomoro No just the OSC2LED. The Bela program is just a simple pd sketch that is sending OSC data to the screen for testing purposes at the moment.

giuliomoro · Mar 2, 2020

insignificatother However when running it from start up it stops the other Bela program that is enabled to run on start up.

Can we see the .service file? Also, what is the log of the Bela program that runs on startup, and what is the log of your program running at startup? You can achieve such logs with journalctl -fu SERVICENAME

Iinsignificatother · Mar 2, 2020

Here is the .service file

[Unit]
Description=OSC to IC2 Screen Launcher
After=network-online.target

[Service]
ExecStart=/root/Bela/scripts/run_project.sh Screen_Test_Error
Type=simple
Restart=always
RestartSec=1
WorkingDirectory=/root/Bela/projects/Screen_Test_Error
Environment=HOME=/root
KillMode=process

[Install]
WantedBy=default.target

Here are the logs

root@bela:~# journalctl -fu bela_startup.service
-- Logs begin at Thu 2016-11-03 17:16:43 UTC. --
Nov 03 17:16:56 bela stdbuf[293]: sigmund~ version 0.07
Nov 03 17:16:56 bela stdbuf[293]: Bela digital: channel 0 is set as input at message rate
Nov 03 17:16:56 bela stdbuf[293]: Bela digital: channel 1 is set as input at message rate
Nov 03 17:16:56 bela stdbuf[293]: Bela digital: channel 2 is set as input at message rate
Nov 03 17:16:56 bela stdbuf[293]: Bela digital: channel 3 is set as input at message rate
Nov 03 17:16:56 bela stdbuf[293]: connecting to port 7562
Nov 03 17:17:00 bela stdbuf[293]: Makefile:570: recipe for target 'runonly' failed
Nov 03 17:17:00 bela stdbuf[293]: make: *** [runonly] Terminated
Nov 03 17:17:00 bela systemd[1]: Stopping Run Bela at boot...
Nov 03 17:17:01 bela systemd[1]: Stopped Run Bela at boot.

root@bela:~# journalctl -fu custom_program 
-- Logs begin at Thu 2016-11-03 17:16:43 UTC. --
Nov 03 17:17:03 bela systemd[1]: custom_program.service: Service hold-off time over, scheduling restart.
Nov 03 17:17:03 bela systemd[1]: Stopped OSC to IC2 Screen Launcher.
Nov 03 17:17:03 bela systemd[1]: Started OSC to IC2 Screen Launcher.
Nov 03 17:17:04 bela run_project.sh[681]: Checking the board is up and running at root@192.168.7.2...Warning: Permanently added '192.168.7.2' (ECDSA) to the list of known hosts.
Nov 03 17:17:03 bela run_project.sh[681]: done
Nov 03 17:17:03 bela run_project.sh[681]: Board found at root@192.168.7.2
Nov 03 17:17:03 bela run_project.sh[681]: Running Screen_Test_Error...
Nov 03 17:17:03 bela run_project.sh[681]: Pseudo-terminal will not be allocated because stdin is not a terminal.
Nov 03 17:17:04 bela run_project.sh[681]: make: Warning: File 'libraries/UdpClient/build/UdpClient.d' has modification time 96520642 s in the future
Nov 03 17:17:05 bela run_project.sh[681]: Running /root/Bela/projects/Screen_Test_Error/Screen_Test_Error

giuliomoro · Mar 2, 2020

insignificatother ExecStart=/root/Bela/scripts/run_project.sh Screen_Test_Error

run_project.sh is going to call make stop, thus killing the other program. You should run the program directly with /root/Bela/projects/Screen_Test_Error/Screen_Test_Error.

Iinsignificatother · Mar 2, 2020

And it's working. My noobness it showing. Thank you so much for your help and quick responses.

crosswick · Mar 3, 2020

giuliomoro yes

giuliomoro · Mar 29, 2021

So here's a summary HOW-TO, for posterity:

add this project to your Bela projects: http://github.com/giuliomoro/OSC2OLED4Bela . If you use a different project name, replace OSC2OLED4Bela with your project name in all the steps below.
open the project and build it. When running, it will not emit any audio, but you should be able to send it OSC messages on bela.local:7562 from the host computer. You can run it like this for testing.
to see what messages and formats are supported, see the parseMessage() function in render.cpp. For instance, you can send /osc-test followed by a float, /tr followed by a float (ignored) and/or a string, /param1 followed by a float. You can edit the program to change or add support for OSC messages
when you have a reliable way of sending OSC messages to it from the host, create a file /lib/systemd/system/osc2oled.service with this content:

[Unit]
Description=OSC to IC2 Screen Launcher
After=network-online.target

[Service]
ExecStart=/root/Bela/projects/OSC2OLED4Bela/OSC2OLED4Bela
Type=simple
Restart=always
RestartSec=1
WorkingDirectory=/root/Bela/projects/OSC2OLED4Bela
Environment=HOME=/root
KillMode=process

[Install]
WantedBy=default.target

This can be done from the terminal or by creating a file osc2oled.service in your project (make sure the file includes only the text above and none of the automatically-generated content in the file you create) and then linking it into place by running ln -s /root/Bela/projects/OSC2OLED4Bela/osc2oled.service /lib/systemd/system/osc2oled.service in the Bela IDE console.

start the process in the background with systemctl start osc2oled, stop it with systemctl stop osc2oled.
while running in the background, you can visualise the process's output with journalctl -fu osc2oled (if executing the command from the Bela IDE console, use journalctl -n 20 -u osc2oled | cat instead)
once you verify it is working, you can open a different Bela project and try to send OSC to it from the Bela project instead of the host
once you are happy, you can enable the osc2oled process to start automatically in the background at boot with systemctl enable osc2oled. Later you can disable it with systemctl disable osc2oled
caveat: when running at startup, the osc2oled service will probably start after the Bela program has started, so if you send OSC to it too early when your program starts, some content may not be visualised on the screen.

Remork · Apr 7, 2021

giuliomoro

thanks for the overview! nice one.
i got everything working, up to sending OSC from a Pd patch to the background program -
but only after referencing the logs and your subsequent answer four posts up.
is it possible, for future reference for me and my fellow nitwits, to edit your post some, and have all the relevant info in this one place?
to clarify:

giuliomoro [Service]
ExecStart=/root/Bela/projects/(NAME OF PROJECT)/(NAME OF PROJECT)
Type=simple
Restart=always
RestartSec=1 (<< no need for ~~http://bela.io/~~ i think?)
WorkingDirectory=/root/Bela/projects/(OSC2OLED4Bela or NEW NAME OF PROJECT)
Environment=HOME=/root
KillMode=process

i realise this might all be self-explanatory to some, but it's not to everybody

also

giuliomoro Bela IDE console, use journacltl -n 20 -u osc2oled | cat instead)

has a typo in journalctl, which is meh if you copy/paste.

and last,

giuliomoro systemctl enable osc2oled

doesn't seem to work with the /***** osc2oled.service *****/ header (generated in the IDE > new file) still on line 1 of the service file. had to remove that, so [unit] was the first thing in there. again, probably obvious to someone who knows what they're doing, but might save some frustration for others.

feel free to delete this post after if needed.
and thanks for walking us through this!

giuliomoro · Apr 7, 2021

@Remork . Thanks for the feedback, hopefully it's fixed now.

Remork · Apr 7, 2021

giuliomoro
well.. dunno?
with the risk of being pedantic
is the "http://bela.io/" supposed to be in the RestartSec line?

and

giuliomoro journalcltl

still has an L too many.

giuliomoro · Apr 7, 2021

Remork is the "http://bela.io/" supposed to be in the RestartSec line?

D'OH

Remork still has an L too many.

D'OH D'OH

:face_with_rolling_eyes:

"pedantic" == reasonable in this case. Fixed now I think (again!).

giuliomoro · Apr 7, 2021

can't even get the emoji to work ..

Remork · Apr 7, 2021

giuliomoro can't even get the emoji to work .

LOL

looks super now.
but seriously, can you pin post 84 somewhere?
add it to the Wiki maybe? i know i'll be looking for this in the future..

giuliomoro · Apr 7, 2021

let's see if magic works:

@bela_robert any chance you could turn https://forum.bela.io/d/314-is-anyone-successfully-using-i2c-oled-lcd/85 into a KB page?

bela_robert · Apr 7, 2021

I certainly can. I'll get that together next week when I'll have an OLED screen to hand to test with and post here once it's up.

giuliomoro · Apr 7, 2021

thanks

Vvivian · Apr 25, 2021

giuliomoro yeah wow, im at testing stage and im not sure where im going wrong, likely something very basic in the syntax in SC but i setup a simple osc path but no results...
''s.boot
~displayOSC = NetAddr.new("192.168.7.1", 7562);
~displayOSC.sendMsg('bela.local:7562', "magic!"); "
ultimately aiming to send different plot values/waveshapes

giuliomoro · Apr 25, 2021

did you change the OSC2OLED4Bela program at all? I think you are not using the correct syntax and address.
I think in its original form it only responds to a handful of OSC addresses:

/osc-test + float, /tr + float + string, /param1 + float.

So the following should work (running it from Sc on the host), while OSC2OLED4Bela is running on Bela:

~displayOSC = NetAddr.new("192.168.7.2", 7562);
~displayOSC.sendMsg('/osc-test', 123.23);
~displayOSC.sendMsg('/tr', 123.23, 'mystr');
~displayOSC.sendMsg('/param1', 123.23);

Vvivian · Apr 25, 2021

giuliomoro ok great, this is helpful thank u, ill test with this and im sure ill have some questions shortly!

Vvivian · Apr 26, 2021

giuliomoro hi, i have two related questions that could be more SC syntax related but i thought id try here first...if i were to try and plot this line to oled
'''
Signal.sineFill(1000, 1.0/[1,2,3,4,5,6]).plot;
'''
do i use .asString to speak to OSC or .asRawOSC?
and a similar question about printing changing values to oled,
is printing the value of this slider related to .envirPairs?
'''
Window.closeAll;
w = Window ("gui", Rect(20,20,150,30))
.front
.alwaysOnTop(true);
~sliderx = Slider(w, Rect(20,20,150,30))
~sliderx.action({
arg obj;
w.view.background_(Color.black);
obj.value.postln;
});
'''
thanks, trying to get a feel for the environment