Pure Data

Everything related to Pure Data and Bela

K
Bela Cape Issues - Continuous Tone
- SoftwarePure Data
- Having an issue with my Bela... Using PureData as my language in the IDE, any project that I would run was outputting a sine wave at 440Hz and another right around 2756Hz. I t...
0 replies
A
Software Interrupt using Bela and PD
- SoftwarePure Data
- Hello, I've done this project where i have buttons that allow to change decay and filter (using a potentiometer) in the sounds being played. For visualisation and signalisatio...
1 reply
S
HX710B Air Pressure (0-40KPA) Sensor Module
- SoftwarePure Data
- Hi, I tested the HX710B Air Pressure Sensor Module (0-40kPa) with an Arduino sketch and a library I found on internet and it works fine (see picture). Also, I think the sensor...
59 replies
P
How to use OLED display with heavy
- SoftwareC/C++Pure DataSolved
- Is there a viable way to use an OLED display with a heavy compiled project? I had a look at this Posts: https://forum.bela.io/d/4458-osc-with-heavy but so far only the OSC-rec...
5 replies
A
using digital pins with hvcc
- SoftwarePure DataSolved
- ...ust started recently working with a bela mini and I managed to get my patches work with hvcc, but I struggle to get the pins working. I tried to set them up [ r bela_digitalIn...
2 replies
Q
Vumeter in bela
- SoftwarePure Data
- Hi everyone, I would like to build a matrix mixer with a bela mini with 8 inputs and outputs. Do you think it is possible to have a decent vumetering performance thru a screen...
7 replies
J
I want to use render.cpp and PD
- SoftwarePure Data
- I want to send signals to Bela from an external device to PD width UART(tx,rx). Because IDE Libraries Expamples(Serial Communication/serial) worked well, I am thinking of star...
5 replies
S
PureData from raspberry pi pico serial
- SoftwarePure Data
- Serial signal from raspberry pi pico is not reflected on PD. IDE can receive serial signals using render.cpp(/dev/ttyS4). But No serial signal is received on PureData.
3 replies
S
accessing the shell from PD
- SoftwarePure Data
- I'd like to access the shell from Pd to run some scripts (mainly to automate the process of archiving recorded sessions to an external HDD), but the shell object from the ggee...
29 replies
J
Pd subfolders
- SoftwarePure DataSolved
- What is the path to call for when I have a project with sound files within a subfolder? ./subfolder/file.wav does not work, I guess because libpd is in a different location (?...
8 replies
J
Cpu overload - can't access IDE
- SoftwarePure Data
- So, how do I remove an 'autoload' project without the IDE?
1 reply
J
Precompiled pd externals for Bela, anywhere?
- SoftwarePure DataSolved
- So, I came across an old thread talking about suggested optimizations to build efficient puredata externals for Bela. As I am not an expert in compiler optimizations, could so...
4 replies
N
pow~ in hvcc
- SoftwarePure Data
- I am bughunting a patch that runs well on pd on macos, compiles using the hvcc build script but then doesn’t produce the same sounding results. During compilation I get warnin...
2 replies
P
Switch~ to free up Puredata DSP
- SoftwarePure Data
- Hi, I'm pushing Bela beyond its limits. Has anyone implements a switchfunction in Puredata to lighten the load by switching in and out subpatches?
1 reply
Fade out when not in use
- SoftwarePure Data
- I'm wondering if there is a way in PureData to have some sort of timer that keeps track of the last time a button is pressed, and fades down the mains, until it is used again....
6 replies
A
Error thrown when trying to use libpd
- SoftwarePure Data
- In file core/default_libpd_render.cpp: invalid argument type 'void' to unary expression column: 6, line: 798 I am getting thrown an error ever since I updated the board softwa...
1 reply
M
PD multiplexer capelet example
- SoftwarePure Data
- Hey, I'm using the multiplexer example, but I'm getting wrong readings. I have connected 8 pots to the 1st channel (0.0, 0.1 , 0.2 etc) but I'm getting the values as a column ...
16 replies
T
Write to textfile and Halt Board Script in Pure Data
- SoftwarePure DataSolved
- Hi! I'm trying to make Bela run a Pure Data patch that writes to a text file and calls the '/root/Bela/scripts/halt_board.sh' script. It's working but I get underrun and mode ...
12 replies
N
hvcc not found
- SoftwarePure DataSolved
- After successfully installing hvcc and updating the board I tried to compile a hello world-like patch. I got the error message ./build_pd_hvcc.sh: line 42: hvcc: command not f...
15 replies
S
Bela IDE no longer loading
- SoftwarePure Data
- Hello, I am working on an embedded instrument using Bela. Recently, I have been unable to get the Bela IDE to load. Up until this point there was no issues using the IDE and I...
5 replies

Pure Data

Everything related to Pure Data and Bela

Bela Cape Issues - Continuous Tone

Software Interrupt using Bela and PD

HX710B Air Pressure (0-40KPA) Sensor Module

How to use OLED display with heavy

using digital pins with hvcc

Vumeter in bela

I want to use render.cpp and PD

PureData from raspberry pi pico serial

accessing the shell from PD

Pd subfolders

Cpu overload - can't access IDE

Precompiled pd externals for Bela, anywhere?

pow~ in hvcc

Switch~ to free up Puredata DSP

Fade out when not in use

Error thrown when trying to use libpd

PD multiplexer capelet example

Write to textfile and Halt Board Script in Pure Data

hvcc not found

Bela IDE no longer loading