Hi,

I'm having an issue with my SD card image. I need to run the same image on three BBB/Bela boards, so I used WinDisk32 to copy the original image and then burn it to another SD card. Both the original card and the new card work in BBB#1, but won't work in any other BBB. I've tried the image in several other boards, but no luck. I can't get another board to run off of that SD card. I've tried using the load-from-SD button on boot, but the boards just load the original beagleboard image. I've connected to the devices over serial after boot, and I can see that both images are present, but I can't the Bela image to load and run.

root@beaglebone:~# lsblk
NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
mmcblk1boot0 179:16   0     1M  1 disk
mmcblk1boot1 179:24   0     1M  1 disk
mmcblk0      179:0    0  14.9G  0 disk
├─mmcblk0p1  179:1    0  67.4M  0 part /media/BELABOOT
└─mmcblk0p2  179:2    0   3.5G  0 part /media/BELAROOTFS
mmcblk1      179:8    0   3.7G  0 disk
├─mmcblk1p1  179:9    0    96M  0 part /boot/uboot
└─mmcblk1p2  179:10   0   3.6G  0 part /

This is what I get with fdisk:


Disk /dev/mmcblk0: 15.9 GB, 15931539456 bytes
4 heads, 16 sectors/track, 486192 cylinders, total 31116288 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xeedb4a61

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1   *        2048      140000       68976+   c  W95 FAT32 (LBA)
/dev/mmcblk0p2          141312     7471103     3664896   83  Linux

Disk /dev/mmcblk1: 3925 MB, 3925868544 bytes
4 heads, 16 sectors/track, 119808 cylinders, total 7667712 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk1p1   *        2048      198655       98304    e  W95 FAT16 (LBA)
/dev/mmcblk1p2          198656     7667711     3734528   83  Linux

Disk /dev/mmcblk1boot1: 1 MB, 1048576 bytes
4 heads, 16 sectors/track, 32 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mmcblk1boot1 doesn't contain a valid partition table

Disk /dev/mmcblk1boot0: 1 MB, 1048576 bytes
4 heads, 16 sectors/track, 32 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mmcblk1boot0 doesn't contain a valid partition table

I'm tearing my hair out with this, as I need to have this exact image running in three different boards and since it's a very custom image at this point, can't start over with a new one from scratch. Any ideas as to what the problem could be?

Thanks,
Colin