Connect bela to ad-hoc network

Zeugma

Hi all,
my name is Olivier and i am a french newbie user of bela and puredataist for a long time.
For my project i want to connect bela to my tablet's hotspot.
This is what i do :
root@bela:~# ip link set wlan0 down
root@bela:~# iwconfig wlan0 mode ad-hoc
root@bela:~# iwconfig wlan0 essid ANDRO
root@bela:~# iwconfig wlan0 channel 6
root@bela:~# ip link set wlan0 up
root@bela:~# ip addr add 10.42.43.1/8 dev wlan0
root@bela:~# iwconfig wlan0 ap E4:BB:E4:75:22:A9
It works nice. What is the best way to edit this setup into /etc/network/interfaces ? I am a bit confused on the good use.
Thank you.

giuliomoro

By default, /etc/network/interfaces is set to look at the settings for wlan0 in /etc/wpa_supplicant/wpa_supplicant.conf. So that's where you will have to set them . I am not very familiar with its syntax though, so you may want to look at man wpa_supplicant or some online resources.