J
joesh

  • Oct 11, 2024
  • Joined Oct 3, 2024
  • 1 discussion
  • 6 posts
  • Okay, have done Giuliomoro, but just hunted down another cable and the GLiss now shows up (using - ioreg -p IOUSB). Thought I post this here, in cas other users had problems.

    Here's the output now (looks healthier):

    +-o Root <class IORegistryEntry, id 0x100000100, retain 17>
    +-o AppleUSBXHCI Root Hub Simulation@14000000 <class AppleUSBRootHubDevice, $
    +-o Bluetooth USB Host Controller@14300000 <class AppleUSBDevice, id 0x100$
    +-o Gliss-v1.2@14100000 <class AppleUSBDevice, id 0x100000cf9, registered,$

    Just went back to the Gliss update, and everything worked fine. I'm not sure what's wrong with the other cable as I use it all the time and never had a problem. However, I guess I need to change cables as maybe it's fine for Teensy, but not for MIDI application(s).

    Anyhow, all's well that ends well.

  • BTW, you might like to see the short version too (with only ioreg -p IOUSB), which gives this with the Gliss plugged in.

    joesh@Joeshs-MacBook-Pro-2 ~ % ioreg -p IOUSB
    +-o Root <class IORegistryEntry, id 0x100000100, retain 17>
    +-o AppleUSBXHCI Root Hub Simulation@14000000 <class AppleUSBRootHubDevice, $
    +-o Bluetooth USB Host Controller@14300000 <class AppleUSBDevice, id 0x100$

  • See post below - resolved due to a bad cable.

  • Resolved the problem, see below.

  • Okay, I already chatted with you there. However, I thought you might want to have a thread here, but clearly two threads isn't really practical.

  • Is there somewhere here where we can make suggestions for Gliss, or do we need to write them directly to you via the contact page (at Bela)?