Flucoma on Bela in 2025?

anteater

Hello,

I was reading through this thread on installing Flucoma in Bela:
https://forum.bela.io/d/2019-building-flucoma-on-bela-issue-upgrading-cmake/8

As this all seems quite complicated, is this still the only way of getting Flucoma to work on Bela? I'm trying to follow the steps here:
https://github.com/BelaPlatform/bela-image-builder/releases/tag/v0.5.0alpha2
But after flashing the SD, my Bela doesn't seem to be booting properly - I'm guessing it has to do with this line:
"in order to work with Bela Rev C or Bela Mini Rev C you need to update the device tree overlays in /opt/bb.org-overlays/ with the latest from https://github.com/BelaPlatform/bb.org-overlays"

But to be honest as a Bela novice I'm not totally sure how to do this. Any help would be appreciated.

giuliomoro

anteater But after flashing the SD, my Bela doesn't seem to be booting properly - I'm guessing it has to do with this line:

No, if the board doesn't boot properly it is not related to this line. Can you explain what you mean by "it doesn't boot properly"? What do the blue lights do?