• Gliss
  • linear/exponential option

Hello, It seems to me that when passing the finger continuously from the lowest to the highest part of the touch strip or viceversa it outputs voltages in a linear fashion. I think this is so because, as it is known, when the volume is controlled linearly the ear doesn't perceive the gradual increase or decrease because the human ear works exponentially. My perception when controlling volume (VCA) or opening a filter gradually with the touch strip in control mode is that the change is not so gradual, instead it does the typical linear sudden volume increase. Is there a way to make the touch strip send voltages exponentially instead of linear?

Pricto changed the title to linear/exponential option .

That can be done in code or with an external expo converter ...

Guess I'll have to learn coding because exponential converters for 6 gliss is not a viable option for me.

Let me see if I can send you something to that effect.

4 days later

Just tried to do it, downloaded the file you sent me (a .bin achive) and it tells me:
Invalid firmware selected
The firmware you selected is invalid.
If you've uploaded custom firmware, check that you've uploaded the correct file type and try again.

Do I have to open the .bin file or convert it into something else?
Please excuse my ignorance in these issues...
I could upgrade all my modules to the latest upgrade. This was cool...

7 days later

Hello, I've just tried it... but now it tells me that it doesnt recognize de module... And now I can't update it and it doesn't work anymore...

This is what it tells me now: Can't update the selected device

The device you selected isn't a Gliss module. Select Gliss from the list to continue.

If Gliss isn't appearing in the list, check your USB connection and click Rescan.

I rescan it and it recognizes the module as a gliss but when I choose it press continue it tells me that

When I first tried it while in the process of rewriting it stopped saying that it couldn't complete the operation and to try again...

And now is dead. No lights, no nothing. just the light from the usb connection. It doesn't work anymore.

Does the button blink red when you give it power?
What operating system are you on?

No, when I give it power the only thing that lits is the white led in the back. I use Windows 10 home.

    Get stuck in this step: click Connect. In the dialog that shows up select "DFU in FS mode" and click Connect again

    When I click connect it asks me which of the two supposedly connected devices: I've tried choosing both ("chicony electronics corp." or "Ligh on technology corp.") and it says: NotFoundError: Failed to execute 'requestDevice' on 'USB': No device selected.

    The only device connected to the computer is the module...

    even if I have the module disconnected it asks me to choose between the two supposed devices...