Is there any way to control the Bela mini on-board Led using C++ on render function?
I am aware that I can disable the led, tickbox in the IDE, from the Settings -> Disable LED
Yes, see here https://learn.bela.io/using-bela/technical-explainers/other-uses-of-gpio-pins/
Thanks a lot for the fast reply
With bela mini and GPIO=89 I successful control the led(red led)
I try to control the led GPIO=87 (Blue led), but it did not work.
Is it possible to control the GPIO=87 led?
On the example -> digital -> synchronous-gpio There is a user command line argument:
But when I run the program I get this warning
/root/Bela/projects/exampleTempProject/exampleTempProject: unrecognized option '--disable-cape-button-monitoring'
Ross On the example -> digital -> synchronous-gpio There is a user command line argument:
Thanks for pointing it out. I fixed that now. You should use --stop-button-pin -1 instead as a command line option.
With that option I can control both LEDs when running the example, changing 89 to 87 as appropriate.
Everything works fine