giuliomoro
I logged in using screen and ran the scripts that way.
I don't see it in ifconfig, which lists the following:
enp0s25: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether f0🇩🇪f1:d9:80:74 txqueuelen 1000 (Ethernet)
RX packets 23 bytes 6302 (6.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 144 bytes 23792 (23.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 20 memory 0xf2600000-f2620000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 278694 bytes 16963102 (16.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 278694 bytes 16963102 (16.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.16 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::62d8:19ff:fed1:3652 prefixlen 64 scopeid 0x20<link>
ether 60:d8:19:d1:36:52 txqueuelen 1000 (Ethernet)
RX packets 130046 bytes 150089640 (143.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 81916 bytes 13645495 (13.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0