Ok, a new problem related to above . Once I have flashed my SD card, and I use the 3 Jumpers method to boot from my SD card, how do I boot from the SD card without the jumpers?
I have run these in the IDE:
" /opt/Bela/bela_bootloader.sh. This should restore functionality of the image on the eMMC, but if there is an SD card inserted, it will boot from the SD card.
if you want to update the Bela image on the eMMC with that is on the SD card, then run /opt/Bela/bela_flash_emmc.sh "
The board still won't boot without the jumpers. Is this just how the Bela(regular) works now?