I'm a complete beginner with command line so please be patient with me.
I'm trying to get NETGEAR A6100-100PES AC600 802.11AC working with Bela following the guidelines here:
https://github.com/BelaPlatform/Bela/wiki/Connecting-Bela-to-wifi
root@bela ~/Bela# lsusb
Bus 001 Device 002: ID 0846:9052 NetGear, Inc. A6100 AC600 DB Wireless Adapter [Realtek RTL8811AU]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@bela ~/Bela# ip a
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether XX:a3:XX:b5:XX:XX brd ff:ff:ff:ff:ff:ff
3: usb0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether XX:XX:c5:XX:4c:XX brd ff:ff:ff:ff:ff:ff
inet 192.168.7.2/24 brd 192.168.7.255 scope global usb0
valid_lft forever preferred_lft forever
inet6 fXXX::XXXX:c5ff:XXXX:XXXX/64 scope link
valid_lft forever preferred_lft forever
Bela is powered via 5V barrel.
So, there is no wlanX device, so I tried to install drivers but get:
root@bela ~/Bela# git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux
Cloning into 'rtl8812AU_8821AU_linux'...
fatal: unable to access 'https://github.com/abperiasamy/rtl8812AU_8821AU_linux/': Could not resolve host: github.com
Any ideas at this point? Thanks.