Initialise... loop in IDE

Ember

The IDE error log shows some error from File Manager. Maybe too many files in the project? When the IDE loads, can you select a different project? Then reboot

Ember

giuliomoro Thanks a lot! It works. Should I avoid selecting original project?

giuliomoro

the line that fails on the server is trying to list subfolders in the project. Is it possible you had a lot of them in that project?

Run the following in a terminal on your computer after replacing PROJECTNAME with the name of the project that was giving you trouble:

ssh root@bela.local find -L Bela/projects/PROJECTNAME -type d -maxdepth 1

If that's too much text, try:

ssh root@bela.local "find -L Bela/projects/PROJECTNAME -type d -maxdepth 1 | wc -l"

Which would give you the number of subfolders. For good measure also run:

ssh root@bela.local "find -L Bela/projects/PROJECTNAME | wc -l"

which will give you the total amount of files in the folder.

Ember

giuliomoro
I don't know why there are so many subfolders in that project. I remember that there are just some acoustic files.

giuliomoro

my bad, should have been maxdepth:

ssh root@bela.local find -L Bela/projects/acoustic -type d -maxdepth 1

and

ssh root@bela.local "find -L Bela/projects/acoustic -type d -maxdepth 1 | wc -l"

and

ssh root@bela.local "find -L Bela/projects/acoustic | wc -l"

Ember

giuliomoro

right, so it's definitely not the number of files/folders. Can you simply do:

ssh root@bela.local "find -L Bela/projects/acoustic; ls -lh Bela/projects/acoustic "

so we see if there is any problematic file name?

Ember

giuliomoro C:\Users\25775>ssh root@bela.local "find -L Bela/projects/acoustic; ls -lh Bela/projects/acoustic "
Bela/projects/acoustic
Bela/projects/acoustic/test_record.txt
Bela/projects/acoustic/acoustic
Bela/projects/acoustic/build
Bela/projects/acoustic/build/Makefile.inc
Bela/projects/acoustic/build/render.s
Bela/projects/acoustic/build/render.d
Bela/projects/acoustic/build/render.o
Bela/projects/acoustic/build/render.ii
Bela/projects/acoustic/build/render.bc
Bela/projects/acoustic/settings.json
Bela/projects/acoustic/cw_19000hz_180s.wav
Bela/projects/acoustic/100_8channel_deg_0.wav
Bela/projects/acoustic/cw_4khz_5s.wav
Bela/projects/acoustic/render.cpp
Bela/projects/acoustic/cw_19khz_20s.wav
total 193M
-rw-r--r-- 1 root root 15M Feb 21 2024 100_8channel_deg_0.wav
-rwxr-xr-x 1 root root 2.9M Feb 28 2024 acoustic
drwxr-xr-x 2 root root 4.0K Feb 28 2024 build
-rw-r--r-- 1 root root 17M Feb 26 2024 cw_19000hz_180s.wav
-rw-r--r-- 1 root root 1.9M Feb 21 2024 cw_19khz_20s.wav
-rw-r--r-- 1 root root 520K Feb 21 2024 cw_4khz_5s.wav
-rw-r--r-- 1 root root 11K Feb 28 2024 render.cpp
-rw-r--r-- 1 root root 557 Feb 28 2024 settings.json
-rw-r--r-- 1 root root 157M Feb 28 2024 test_record.txt

giuliomoro

Who know, maybe the big text file?
Can you do

ssh root@bela.local cat Bela/projects/acoustic/settings.json so we can see which file was open?

Ember

giuliomoro C:\Users\25775>ssh root@bela.local cat Bela/projects/acoustic/settings.json
{
"fileName": "test_record.txt",
"CLArgs": {
"-p": "16",
"-C": "4",
"-B": "16",
"-N": 1,
"-G": 1,
"-M": "0",
"-H0,": "-6",
"-H1,": "-6",
"-H2,": "-6",
"-H3,": "-6",
"-H4,": "-6",
"-H5,": "-6",
"-H6,": "-6",
"-H7,": "-6",
"-I0,": "10",
"-I1,": "10",
"-I2,": "10",
"-I3,": "10",
"-I4,": "10",
"-I5,": "10",
"-I6,": "10",
"-I7,": "10",
"user": "",
"make": "",
"-X": "0",
"audioExpander": "0",
"-Y": "",
"-Z": "",
"--disable-led": "0"
}
}

giuliomoro

Ember "fileName": "test_record.txt",

probably the issue is with the fact that the open files is test_record.txt and this is a 157MB text file, which is most definitely not what the IDE was designed to handle ... You are better off accessing this file as read-only at http://bela.local/projects/acoustic/test_record.txt . In order to be allowed to reopen the project, you have two options:

the easiest thing is to remove its settings.json file so that it reloads the default one, which will try to open render.cpp instead. DO this running rm /root/Bela/projects/acoustic/settings.json in the IDE's console. Then you can open the project again. That will also forget any custom settings you have set so far, which you'll need to reset manually. AFAICT, the only non-default setting is you have selected 4 analog channels currently.
alternatively, replace the current setting in the file. Can be done running this in the IDE's console: sed -i s/test_record.txt/render.cpp/ /root/Bela/projects/acoustic/settings.json . All other settings will be preserved.

Ember

giuliomoro Ok, I have removed the settings.json and opened the project successfully, thanks a million!

« Previous Page