Dear community!
I'm new here and trying my hand at a first project. I'm wondering about the pull-up or -down resistors on the digital pins of Bela Mini. Can they be set directly in the code or do I need to do that somewhere else? Do you know what resistance they have?
Thanks!
/Leo
We usually recommend to provide external pull resistors. The internal resistors are around 50k, the default to pull down and can be set to pull up by running config-pin P2.01 gpio_pu and the likes. If you want to do it from C++ you can use the PinmuxUtils::set() function from MiscUtilities.h : http://docs.bela.io/namespacePinmuxUtils.html#a7c1eb8fac4ece78b00716d43865f2a0d
