Starterkit, can't reach BELA after update

daemlack

Dear Bela community,
I started the C++ workshop with my starter kit on youtube. It all worked and it was accessible under bela.local, then I dragged the .zip file into the ide for updating as in the video and it all seemed fine. The IDE did refresh and since then I can't access it and get: bela.local refused to connect in chrome. I can get as far as you can see in the picture below. It has to be said that I am an absolute beginner with programming/linux etc...

alt text

For any help, thank you in advance!

giuliomoro

Unfortunately v0.3.8e shipped with a broken IDE update procedure. Do you have a way of running the file Bela/scripts/update_board.sh when you download this zip archive to your computer? Running that successfully should fix the issue.

If that's too much hassle, just ssh back on the board and do mv _BelaUpdateBackup Bela. This will give you back your original image which is more than up-to-date enough to follow along the whole course.

daemlack

dear giuliomoro,

thank you very much, i was able to use a mac to run the update_board script contained in the zip file (for beginners definitely the easiest solution to this problem). i can access the board again!

cheers