Hi, I'm building a Pepper and have a question about steps 13-14 in the guide (https://github.com/BelaPlatform/bela-pepper/wiki/Building-Rev2). From zooming in on the images in the guide (front: https://raw.githubusercontent.com/wiki/BelaPlatform/bela-pepper/Images/rev2/step-13.jpeg and back: https://raw.githubusercontent.com/wiki/BelaPlatform/bela-pepper/Images/rev2/step-14.jpeg), it looks like the capacitor at C9 and the diode at D1 are very close, but the metal rings on the board aren't supposed to be connected. On the board I received, they are connected on the back side (see attached image). Is this an issue, or am I misreading the images in the guide? I wanted to check before going any further.
checking the schematics, they're supposed to be connected there.
https://raw.githubusercontent.com/BelaPlatform/bela-pepper/master/Design%20Files/Schematic/pepper-rev2b.pdf (top left of schematic.)
I can confirm that too, they're supposed to be connected.